Voltage

电压

· Voltage rated:  AC208-240V 50/60HZ

· 额定电压： AC208-240V 50/60HZ

Working Temperature

工作温度

· Max. Temperature: 1100 °C ( 1 hr)

   **温度：1100℃ (1小时)

· Continuous working temperature: ≤1000℃

   持续工作温度：≤1000℃

· Recommended heating Rate: ≤10°C /min

   推荐升温速率：≤10℃/分钟

Temperature Controller

控温方式

· PID automatic control and auto-tune function.

   模糊PID控制和自整定调节

· 30 programmable segments for precise thermal processing.

   智能化30段可编程控制

· Built-in protection for the over-heated and broken thermocouple. 

超温和断偶报警功能

Length of heating zone

加热区长度

· 300+300+300mm

Length of constant zone

恒温区长度

· 150+200+150mm

Heating Elements

加热元件

· Resistance wire, Fe-Cr-Al Alloy doped by Mo

· 电阻丝（掺钼铁铬铝合金）

Temperature Accuracy

控温精度

+/- 1 °C

Dimensions

尺寸

· Tube size: Φ150/210/280*1300mm (optional)

· 炉管尺寸：Φ150/210/280*1300mm (可选)

· Overall size: 1300*650*1000mm

· 外形尺寸：1300*650*1000mm

· Two fibrous ceramic tube blocks are included for blocking heat radiation generated from tube center. (Ceramic blocks must be fully inserted into the furnace chamber before heating).

· 两个氧化铝管堵阻挡管中心产生的热辐射（氧化铝管堵必须在加热前塞进炉膛）

Vacuum Flange

真空法兰
 

· One end is KF25 quick clamp flange

   一端为KF25快速卡箍法兰

· Another end is screw tighten flange with gas inlet

   另一端为进气螺丝紧固法兰

Vacuum Pressure

真空压力

· 10^-1pa can be achieved by mechanical pump

   机械泵可达10^-1pa

· 10^-3pa can be reached by molecular pump

   分子泵可达10^-3pa

Net Weight

净重

250kg

Warranty

质保

One year limited warranty with lifetime support  (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty)

一年质保终身支持（消耗品如炉管，石英管堵，O型圈等不在质保范围内）

Warning

注意事项

· Toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision. Please put furnace into fume hood for better safety

· 没有安全控制和监督的情况下，不建议使用有毒或爆炸性气体。为了安全，请把炉子放在通风处。

· Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.

· 在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。

Compliance

认证

· CE Certified

   CE认证